Control Assembly Replacement - GMC Chevrolet Camaro 1998 Service Manual

)
\,
HVAC
Control Assembly Replacement
Removal Procedure
1.
Remove the accessory trim plate. Refer to Bezel
Replacement - IP Cluster (Chevrolet) or Bezel
Replacement - IP Cluster (Pontiac) in Instrument
Panel, Gauges and Console.
2. Remove the HVAC control bolts.
3. Pull the HV AC control out from the 1/P far enough
to access the following components:
• The vacuum connector
• The electrical connectors
• The temperature cable connections
4. Disconnect the vacuum harness connector from
the vacuum selector valve.
5. Disconnect the following electrical connectors
from the HVAC control:
• HVAC mode switch (1)
• HVAC control illumination (2)
• HVAC blower switch (3)
• Rear defogger (4)
6. Remove the temperature control cable (5) from
the control.
When releasing the control cable clips, use a
small screwdriver to gently pry the cable from the
control.
HVAC System - Manual 1-101
282916
282918
1 2
3
282917