GMC Chevrolet Camaro 1998 Service Manual page 837

Body and Accessories
Last Door Closed Locking and Lockout Prevention
Last door closed locking is available on cars with
power locks, this feature provides for delayed locking
of the door (three seconds after the last door is
closed). This allows the driver to exit the vehicle and
press the lock button (either on the key fob or the
door panel), but the doors will not lock until both doors
are closed. When the locked switch is pressed, the
chime will sound three times, indicating a last
door closed locking is pending. Pressing the lock
switch again will lock the doors)mmediately. Pressing
the unlock switch. will cancel a pending last door
closed locking. Last door closed locking is disabl.ed
from the factory, and can be enabled if desired.
Lockout prevention .protects the driver from locking the
keys in the vehicle, this feature disables the power . ·
lock from locking when the keys are in the ignition and
a door is open. If the power lock button is pressed
when a door is open, the chime will sound 5 time as a
reminder to take the keys before locking the: door.
Lo9kout prevention is enabled from the factory,
and can be disabled if desired'.
1. Enter the programming mode.
2. Press the lock swJtch .on the door.
Listen to the number of chimes to c;:letermine
current setting.
The factory setting is in CAPITAL print.
3. Press'the lock switch on the door to increment
desired setting below.
4. Continue customizing other features or exit the
programming mode. ·
Number of Last Door Lockout
Chimes Closed Locking Prevention
1 Disabled
Disabled ·
2 DISABLED ENABLED
3 Enabled Disabled
4 Enabled
Enabled
Remote Lock Control Verification
(Horn Chirp and Parking Lamps Flash).
Av~ilable on vehicles equipped with Universal Theft
Deterrent (UTD) system, this feature provides ·
horn chirps and/or parking lamp illumination to indicate
that the remote transmitter LOCK or UNLOCK
command was received.
1. Enter the programming mode.
2. Press the unlock switch on the remote transmiJter.
Listen to the number of chimes to determine
current setting.
The factory setting is in CAPITAL print.
3. Press the unlock switch .on the remote transmitter
to increment desired setting below.
4. Continue customizing other features or exit the
programming mode.
Theft Deterrent 8-595
Key Fob Key Fob
Number of Lock 1st
Lock 2nd Key Fob
Chimes
Push
Push Unlock
1
Verification Verification Verification
Off · Off
Off
2
Horns
Horns.
Lamps
and Lamps and Lamps
3
Horns Horns
Horns
and Lamps and Lamps
and Lamps
4 Lamps Lamps Lamps
5
LAMPS
HORNS
LAMPS
AND LAMPS
The1t Deterrent Arming Method
Available on vehicles equipped with Universal Theft
Deterrent (UTD) system, this feature provides different
methods of arming the UTD system.
1. Enter the programming mode.
2. Press the unlock switch on the door.
Listen to the number of chimes to determine
current setting.
The factory setting is in CAPITAL print.
3. Press the unlock switch on the door to increment
desired setting below.
4. Continue customizing other features or exit the
programming mode.
Theft Deterrent Arming
Number of Chimes
Method
1 Alarm System Off
2
Remote Transmitter Arms
REMOTE TRANSMlTIER
3
OR DOOR LOCK
SWITCH ARMS
4 Passive (Automatic)
Theft Deterrent Arming Verification
(Horn Chirp and Parking Lamps Flash)
Available on vehicles equipped with Universal Theft
Deterrent (UTD) system, this feature provides
horn chir'ps and/or parking lamp illumination to indicate
when the UTD system has been armed. It is
programmed separately from the remote lock control
verification list above.
1. Enter the programming mode.
2. Press the lock switch on the remote transmitter.
Listen to the number of chimes.to determine
current setting.
The factory setting is in CAPITAL print.
3. Press the lock switch on the remote transmitter to
increment desired setting below.
4. Continue customizing other features or exit the
programming mode.