Repair Instructions; Ip Service Precautions; Trim Pad Replacement - Ip Upper - GMC Chevrolet Camaro 1998 Service Manual

8-500 Instrument Panel, Gauges and Console
1
2
296100
294801
Body and Accessories
Repair Instructions
IP Service Precautions
The SDM can maintain enough voltage to cause a (
deployment for up to 10 minutes after any of the
following situations occur:
• The ignition switch is turned to the OFF position.
• The battery is disconnected.
• The fuse that is powering the SOM is removed.
'
'
Many of the service procedures require removal of the
AIR BAG fuse and disconnection of the deployment
loops. These actions help avoid an .accidental
deployment. If the ihflator modules are disconnected
from the deployment loops, service can begin
immediately without waiting for the 10 minute time
period to expire.
Trim Pad Replacement - IP Upper
Removal Procedure
1. Remove the windshield side garnish moldings ..
Refer to Windshield Side Garnish Molding
Replacement (Without Lift Off Window Pan) in
Stationary Windows.
2. Gently lift the instrument panel (1/P) trim pad (2)
to disengage the dual-lock fasteners (1).
3. Remove the daytime running lamp ambient light
sensor (1).
(
(