Cruise Control Cable Adjustment; Multifunction Lever Replacement - GMC Chevrolet Camaro 1998 Service Manual

8-632 Cruise Control
1
296568
367666
367668
Body and Accessories
Cruise Control Cable Adjustment
1. Lift the adjustment lock button (1) up.
2. Pull the cable adjustment slider (2) rearward until
all slack is removed from cable, but without
opening the throttle.
3. Push down the cable adjustment lock button (1)
until it snaps and locks in place
Important: The cruise control cable must not have
more than 2.0 mm (0.07 in) of slack. Excess slack in
the cable may cause poor performance. For example,
the cruise control system may hesitate when
engaged.
Important: Cable should never be adjusted so tightly
that tension from the cable will not allow the throttle
to close properly. Pulling the cable too tight will prevent
the engine from returning to idle and could cause an
unstable idle quality.
Multifunction Lever Replacement
Removal Procedure
1. Remove the steering column access cover.
2. Disconnect the multifunction lever electrical
connector.
(
\
(
(