GMC Chevrolet Camaro 1998 Service Manual page 428

8-186 Wipers/Washer Systems
J 39529
I\
ii
306515
,
532059
532058
Body and Accessories
2. Connect the RH linkage assembly to the wiper
motor with the J 39529.
Important: When installing the wiper motor, be sure
that the crank arm is in the innerwipe position. The
crank arm drive pin must be engaged in the cam
pocket.
3. Install the wiper motor with two locator pads
pressed into the slots of the bracket.
Notice: Refer to Fastener Notice in Cautions and
Notices.
4. Install the screw.
Tighten
Tighten the screw to 10 N-m (7.5 lb ft).
(
(