Repair Instructions; Body Control Module Replacement - GMC Chevrolet Camaro 1998 Service Manual

)
Body and Accessories
OTC 55 Begin Configuration Display
Conditions for Setting the DTC
OTC 55 is always displayed when the BCM is in the
diagnostic mode. The following two configuration
codes are always displayed immediately after OTC 55:
1. The hardware configuration number
2. The software configuration number
After the configuration codes are displayed, the entire
OTC list is repeated starting with OTC 12.
Repair Instructions
Body Control Module Replacement
Removal Procedure
Caution: Refer to Battery Disconnect Caution in
Cautions and Notices.
1. Disconnect the negative battery cable. Refer to
Battery Negative Cable Disconnect/Connect
Procedwe
2. Remove the 1/P insulator. Refer to Insulator
Replacement - IP (Right Side)
3. Unsnap the BCM (3) from the HVAC duct
bracket (1 ).
4. Disconnect the BCM electrical connectors (2).
Body Control System 8-463
208241
3
386020