8-138
Lighting Systems
294801
294777
294777
Body and Accessories
Installation Procedure
1. Connect the sensor (1) to the DRL electrical
connector (3).
2. Install the DRL ambient light sensor (1) to the
(
trim panel (2).
Twist the DRL ambient light sensor (1) clockwise.
3. Install the IP upper trim pad. Refer to Trim Pad
Replacement - IP Upper in Instrument Panel,
Gauges and Console.
Turn Signal Flasher Replacement
Removal Procedure
1. Remove the clip (1) from the instrument panel
tie bar.
2. Disconnect the turn signal flasher (2) electrical
connector (3).
3. Remove the clip (1) from the turn signal
flasher (2).
Installation Procedure
1. Install the clip (1) to the turn signal flasher (2).
2. Connect the turn signal flasher (2)
electrical connector (3).
3. Install the clip (1) to the instrument panel tie bar.
(