Headlamps Inoperative - Low Beams (Chevrolet); Headlamps Inoperative - Low Beams (Pontiac) - GMC Chevrolet Camaro 1998 Service Manual

Body and Accessories Lighting Systems 8-87
Hazard Lamps Inoperative (cont'd)
Step Action Value(s) Yes No
)
8
Repair a poor connection or open in CKT 140.
- -
Is the repair complete?
Go to Step 9
1. Turn the ignition switch to the OFF position.
Go to Exterior
9
2. Reconnect all connectors/components removed.
-
Lights
-
Have all repairs been made?
System Check
Headlamps Inoperative - Low Beams (Chevrolet)
Step Action Value(s) Yes No
1
Was the entire DRL System Check performed?
-
Go to Headlight
Go to Step 2
System Check
1. Ensure that the headlamp switch in in the HEAD
position.
2. Turn the headlamp dimmer switch to the LOW
2 position.
-
3. Connect a test light from the headlamp switch
connector terminal E to ground.
Does the test light illuminate?
Go to Step 3
Go to Step 4
3
Repair a poor connection or open in circuit 10/12.
- -
Is the repair complete?
Go to Step 5
Replace the headlamp switch. Refer to Headlamp Switch
4
Replacement (Chevrolet) or Headlamp Switch
Replacement (Pontiac).
-
-
Is the repair complete?
Go to Step 5
1. Turn the ignition switch to the OFF position.
5
2. Reconnect all connectors/components removed.
-
Go to Headlight
-
Have all repairs been made? System Check
Headlamps Inoperative· Low Beams (Pontiac)
Step Action Value(s) Yes No
1
Was the entire DRL System Check performed?
Go to DAL
-
Go to Step 2
System Check
1. Turn the headlamp switch to the HEAD position.
2. Turn the headlamp dimmer switch to the LOW
2
position.
-
3. Backprobe with a test light from'the headlamp
dimmer switch connector terminal B and ground.
Does the test light illuminate? Go to Step 4 Go to Step 3
3
Repair the poor connection or open in circuit 1
d.
- -
Is the repair complete? Go to Step 5
Connect a test light between the headlamp dimmer switch
4
connector terminal C and ground. -
Does the test light illuminate? Go to Step 6 Go to Step 7
1. Turn the ignition switch to the OFF position.
5
2. Reconnect all connectors/components removed.
-
Go to DAL
-
Have all repairs been made? System Check
6
Repair a poor connection or open in circuit 12.
- -
Is the repair complete? Go to Step 5
Replace the headlamp dimmer switch. Refer to Headlamp
7
Dimmer Switch Replacement.
- -
Is the repair complete? Go to Step 5