Bezel Replacement - Ip Cluster (Chevrolet) - GMC Chevrolet Camaro 1998 Service Manual

8-502 Instrument Panel, Gauges and Console
296100
367397
367397
Body and Accessories
4. Using the locator pins (3), align the 1/P upper
trim panel (2).
5.
Apply pressure to the rear of the 1/P upper trim
panel (2), engaging the dual lock fasteners (1).
6. Apply pressure to the front of the 1/P upper trim
panel (2), engaging the dual lock fasteners (1).
7. Install the windshield side garnish moldings. Refer
to Windshield Side Garnish Molding Replacement
(Without Lift Off Window Pan) in Stationary
Windows.
Bezel Replacement - IP Cluster (Chevrolet)
Removal Procedure
1. Disable the SIR system. Refer to Disabling the
SIR System.
2. Remove the instrument panel insulator. Refer to
Insulator Replacement - IP (Left Side).
3. Remove the knee bolster bracket. Refer to
Bracket Replacement - Knee Bolster.
4. Lower the steering column.
5. Remove the instrument panel cluster trim bezel
screws.
6. Remove the instrument panel cluster trim bezel.
Installation Procedure
1.
Install the instrument panel cluster trim bezel.
Notice: Refer to Fastener Notice in Cautions
and Notices.
2. Install the instrument panel cluster trim bezel
screws.
Tighten
Tighten the instrument panel cluster trim bezel
screws to 1.9 N-m (17 lb in).
3. Raise the steering column.
4. Install the knee bolster bracket. Refer to Bracket
Replacement - Knee Bolster.
5. Install the instrument panel insulator. Refer to
Insulator Replacement - IP (Left Side).
6. Enable the SIR system. Refer to Enabling the SIR
System.
(
(
(