8-592 Theft Deterrent
\
363517
363515
296215
Body and Accessories
3. Remove the ignition key from the lock cylinder.
4. Install the inflatable restraint coil. Refer to
Inflatable Restraint Steering Wheel Module
Coil Replacement in Restraints.
Shock Sensor Replacement
Removal Procedure
1. Remove the right quarj:er inner rear trim
finishing panel.
·
2. Disconnect the shqck sensor electrical
connector (2).
3. On the convertible; remove the shock sensor (1)
from the wheelhouse bracket.
4. Disconnect the shock sensor electrical
connector (2).
5. On the coupe, remove the shock sensor (1) from
the right rear inner wheelhouse.
6. Remove the shock sensor (2) from the vehicle.
7. Clean the shock sensor mounting surface.
(
(
(