GMC Chevrolet Camaro 1998 Service Manual page 160

1-50 HVAC System - Manual
157224
157225
)
/
237119
HVAC
5. Place the J 33023-A on the clutch rotor.
6. Install the J 41552 down into the inner circle of
slots in the rotor.
Turn the J 41552 clockwise in the slots to engage
the puller tangs with the rotor.
7. Hold the J 41552 in place and use a wrench to turn
the center forcing screw against the J 33023-A to
remove the clutch rotor and bearing assembly.
Compressor Clutch Coil Removal
(VS - Conventional Mount)
Tools Required
• J 6083 Snap Ring Pliers
• J 8433-1 Puller Bar
• J 8433-3 Forcing Screw
• J 33020 Pulley Puller
• J 33023-A Puller Pilot
• J 33025 Clutch Coil Puller Legs
1. Remove the clutch plate and hub assembly. Refer
to Compressor Clutch Plate and Hub Assembly
Removal (VS - Conventional Mount).
(
2. Use the J 6083 in order to remove the rotor and ("
bearing assembly retaining ring.