)
Body and Accessories
Installation Procedure
1. Install the
1/P
compartment door latch (1).
2.
Align and install the
1/P
compartment door latch
bracket and bolts (2).
Notice: Refer to Fastener Notice in Cautions and
Notices.
3. Tighten the 1/P compartment door latch bolts (2).
Tighten
Tighten the
1/P
compartment door latch bolts (2)
to 1.9 N·m (17 lb in).
4. Close the
1/P
compartment door (5).
Trim Plate Replacement - Console
(Automatic)
Removal Procedure
1. Place the ignition switch in the RUN (4) position.
2. Place the shift lever in the NEUTRAL position.
3. Remove the shift control knob. Refer to Floor Shift
Control Replacement in Automatic Transmissions.
4. Unsnap the floor console accessory bin, if
equipped.
5. Open the console armrest door.
Instrument Panel, Gauges and Console 8-517
296109
3
341078