GMC Chevrolet Camaro 1998 Service Manual page 871

)
Body and Accessories
With Traction Control
1. Install the cruise control cable to the vehicle.
2. Inspect the cable end to insure the 0-ring is
in place.
3. Connect the cable bead (1) to the ribbon (3)
4. Remove the shipping retainer.
Important: Cruise control module ribbon must not be
twisted.
5. Pull the engine end of the cruise control cable
until the cable is taut.
6. Install the conduit fitting over the ribbon and snap
cable end into the module.
Ensure that both tangs are engaged.
7. Install the retainer to the cruise control module.
8. Install the cruise control servo cover.
Cruise Control 8-629
2
296577
296582
296583