GMC Chevrolet Camaro 1998 Service Manual page 186

1-76 HVAC System - Manual
365420
282957
282957
9. Connect the electrical connector at the
AJC
compressor.
HVAC
10.
Install the serpentine drive belt. Refer to Drive
Belt Replacement in Engine Mechanical. (
Compressor Mounting Bracket
Replacement (5.7L)
Removal Procedure
1 . Remove the A/C drive belt. Refer to Drive Belt
Replacement (AIC) in Engine Mechanical.
2. Remove the A/C compressor. Refer to
Compressor Replacement (5. 7L).
3. Remove the A/C compressor bracket bolts.
4.
Remove the A/C compressor bracket.
5.
Remove the A/C belt tensioner from the bracket.
Refer to Drive Belt Tensioner Replacement (AIC).
6.
Remove the A/C belt idler pulley from the
bracket. Refer to Drive Belt Idler Pulley
Replacement (AIC).
Installation Procedure
1.
Install the A/C belt idler pulley from the
bracket. Refer to Drive Belt Idler Pulley
Replacement (AIC).
2. Install the
NC
belt tensioner from the
bracket. Refer to Drive Belt Tensioner
Replacement (AIC).
3. Install the A/C compressor bracket.
Notice: Refer to Fastener Notice in Cautions and
Notices.
4. Install the A/C compressor bracket bolts.
Tighten
Tighten the A/C compressor bracket bolts to
50 N·m (37 lb ft).
5. Install the A/C compressor. Refer to Compressor (
Replacement (5. 7L).
6. Install the A/C drive belt. Refer to Drive Belt
Replacement (AIC) in Engine Mechanical.