GMC Chevrolet Camaro 1998 Service Manual page 761

Body and Accessories
Installation Procedure
1. Position the console trim plate (1) over the
shifter lever.
) 2. Connect the cigarette lighter electrical connector.
3.
Connect the PRNDL lamp connector.
4. Insert the forward end of the trim plate (1) into the
console.
5. Apply pressure to the console trim plate (1) and
snap the trim plate (1) into place.
Notice: Refer to Fastener Notice in Cautions and
Notices.
6. Install the console trim plate bolts (2).
Tighten
Tighten the console trim plate bolts (2) to
1.9 N·m (17 lb in).
7. Snap the switch plate (2) to .the floor console,
8. Connect the electrical connectors (4) to thE;i
switches (1, 3), if equipped.
9. Install the coin holder to inside the console.
10. Close the console armrest door.
11. Snap the floor console accessory bin to the •
console, if equipped.
12. install the shift control knob. Refer to Floor Shift
Control Replacement in Automatic Transmissions.
Instrument Panel, Gauges and Console 8-519
1
296126
380886
367401