HVAC
Compressor Hose Assembly
Replacement (3.8L)
Removal Procedure
1. Recover the refrigerant. Refer to Refrigerant
Recovery and Recharging.
2. Remove the A/C compressor and condenser hose
bolt at the accumulator.
3. Discard the 0-ring.
4. Remove the negative battery cable nut from the
engine. block stud.
5. Remove the negative battery cable from the stud.
6. Raise and suitably support the vehicle; Refer
to Lifting and Jacking the Vehicle in General
Information.
7. Remove the A/C compressor and condenser
hose bolt.
8. Discard the 0-ring.
HVAC System - Manual
1-77
282936
43679
365423