Body and Accessories
4. Remove the park and turn signal lamp bolts.
5.
Remove the park and turn signal lamp from the
front bumper fascia.
Installation Procedure
1. Install the park and turn signal lamp to the front
bumper fascia.
Notice: Refer to
FastenerNotice in Cautions and
Notices.
2.
Install the park and turn signal lamp bolts.
Tighten
Tighten the park and turn signal lamp bolts to
)
2.5 N-m (22 lb in).
)
3. Connect the following connectors to the sockets:
• The sidemarker lamp
• The park and turn signal lamp
4. Close the access door in the front bumper air
deflector.
5. Lower the vehicle.
Lighting Systems 8-127
294761
294761
294760