Body. and Accessories
Installation Procedure
1. Install the park and turn signal lamp to the fascia.
Notice: Refer to
Fastener Notice in Cautions and
Notices.
2.
Install the park and turn signal lamp bolts.
Tighten
Tighten the park and turn signal lamp bolts to
2.5 N·m (22 lb in).
3. Connect the electrical connector to the park and
turn signal lamp.
4. Close the access door in the front bumper air
deflector.
5. Lower the vehicle.
Park/Turn Signal Lamp Bulb Replacement
Removal Procedure
1. Raise and suitably support the vehicle. Refer to
Lifting and Jacking the Vehicle in General
1
,
lnformatior:i_.
N
0
"":.:>
u
L, ' .
..
2. Open the a~ce -
.
e ront bumper air )
?
deflectw.
, .
3. Disconnect the electrical connector from the park
and turn signal lamp.
4. Remove the park and turn signal lamp bulb from
the socket.
Installation Procedure
1. Install the park and turn signal lamp bulb to the
socket.
2. Connect the electrical connector to the park and
turn signal lamp.
3. Close the access door in the front bumper air
deflector.
4. Lower the vehicle.
Lighting Systems
8-129
366720
\ f'..-\ \ . . .
~
e
,'.:)f)
\)<R
r~
D ~ ~'\ ~
r1rL>Lfu
tv'P
(.j\
. I
/I
Ni-.il ,:
\"
\
(
,,
Lf
ts~,
N,~k
vs\..\.
' .
! ~)