Fog Lamps Always On (Europe); Fog Lamps Inoperative - All (Domestic) - GMC Chevrolet Camaro 1998 Service Manual

8-82 Lighting Systems Body and Accessories
Fog Lamps Always On (Domestic) (cont'd)
Step Action
Value(s) Yes
No
Replace the foglamp relay. Refer to Fog Lamp Relay
6
Replacement
-
-
Is the repair complete? . .
Go to Step 9
(
Repair the short to B+ in circuit 317 between the fog lamp
7
switch and the fog lamp relay.
.-
-
Is the repair complete? Go to Step 9
Replace the fog lamp switch. Refer to Fog Lamp Switch
8
Replacement - Front (Front) and/or Fog Lamp Switch
-
-
Replacement - Front (Front Pontiac).
Is the repair complete?
Go to Step 9
1. Turn the ignition switch to the OFF position.
9
2. Reconnect all connectors/components removed.
-
Go to Fog Lights
-
Have all repairs been made?
System Ct,,eck
Fog Lamps Always On (Europe) ·
Step Action
Value(s)
Yes
No
1
Was the entire Fog Lights System Check performed?
-
Go to Fog Lights
Go to Step2 System Check
2
Repair the short to B+ in circuit 122.
- -
Is the repair complete? Go to $tep 3
1. Turn the ignition switch to the OFF position.
3
2. Reconnect all connectors/components removed.
-
Go to Fog Lights
-
Have all the repairs been made?
System· Check
Fog Lamps Inoperative - All (Domestic)
Step
Action Value(s) Yes No
(
1
Was the entire Fog Lights System Check performed?
., Go to Fog Lights
-
G,9. to Step 2 . System Check
1. Turn the headlamp switch to the HEAD position.
2. Turn the foglamp switch ON.
2
3. Turn the headlamp dimmer switch to the LOW
position.
-
4. Use a test light to backprobe between the foglamp
switch harness connector circuit 317 and ground.
Did the test light illuminate? Go to Step 3 Go to Step 4
Use a test light in order to backprobe between the foglamp
3
relay connector terminal F9 and ground.
-
Did the test light illuminate? Go to Step 5 Go to Step 6
Use a test lamp to backprobe between the foglamp switch
4
harness connector circuit 9 and ground.
-
Did the test light illuminate?
Go to Step 13 Go to Step 12
5
Repair a poor connection or open in circuit 34.
- -
Is the repair complete? Go to .step 14
Connect a test light between the foglamp relay and
6
terminals E11 and E9.
-
Does the test light illuminate? Go to Step 7 Go to Step 8
Connect a test light between the foglamp relay connector
7
terminals F11 and E9.
-
Does the test light illuminate? Go to Step 9
Go to Step 10
(