Air Inlet Actuator Replacement; Vent Actuator Replacement - GMC Chevrolet Camaro 1998 Service Manual

1-106 HVAC System - Manual
365458
Air Inlet Actuator Replacement
Removal Procedure
HVAC
1. Remove the right side insulator. Refer to Insulator (
Replacement - IP (Right Side) in Instrument
Panel, Gauges and Console.
2. Remove the left side insulator. Refer to Insulator
Replacement - IP (Left Side) in Instrument Panel,
Gauges and Console.
3. Remove the 1/P compartment door hinge screws.
4. Remove the 1/P compartment door.
5. Remove the HVAC module screws.
6. Remove the HVAC module cover.
7. Disconnect the air i.nlet valve linkage.
8. Remove the air inlet valve actuator and
vacuum hose.
Installation Procedure
1. Install the air inlet valve actuator and
vacuum hose.
2. Connect the air inlet valve linkage.
3. install the HV AC module cover.
4. Install the HVAC module screws.
5. Install the 1/P compartment door.
6. Install the 1/P compartment door hinge screws.
7. Install the left side insulator. Refer to Insulator
Replacement - IP (Left Side) in Instrument
Panel, Gauges and Console.
8. Install the right side insulator. Refer to Insulator
Replacement - IP (Right Side) in Instrument
Panel, Gauges and Console.
Vent Actuator Replacement
Removal Procedure
1. Remove the 1/P carrier. Refer to IP Carrier
Replacement in Instrument Panel, Gauges
and Console.
2. Remove the front floor air duct bolt.
3. Remove the front floor air duct.
4. Remove the module cover screws.
5. Remove the module cover.
6. Remove the vent mode valve linkage.
7. Remove the vent mode valve actuator and
vacuum hose.
(