8-150
Lighting Systems
294768
294IT2
294IT4
Body and Accessories
2. Install the taillamp to the rear end finishing panel.
Notice:
Refer to Fastener Notice
3. Install the taillamp nuts.
Tighten
(
Tighten the taillamp nuts to 3 N·m (27 lb in).
4. Reinstall. the rear compartment trim.
Tail Lamp Replacement (Pontiac)
Removal Procedure
1. Reposition the rear compartment trim to access
the taillamp nuts.
2. Remove the taillamp nuts.
3. Remove the taillamp from the rear end panel.
4. Remove the taillamp filler, if needed.
Remove both taillamps in order to replace the
(.
taillamp filler.
.
5. Remove the following wiring harness sockets
remove the taillamp:
• The taillamp socket (1)
• The taillamp/stoplamp/turn signal
sockets (3, 4)
• The back-up lamp socket (2)
(