GMC Chevrolet Camaro 1998 Service Manual page 155

)
)
HVAC
Installation Procedure
Use the following procedure in order to install the
polyalkaline glycol (PAG) refrigerant oil.
• If the compressor is being replaced, drain the
refrigerant oil from both the defective compressor
and the new replacement compressor.
• Measure the amount of oil removed from the
defective compressor.
• If the measured amount is less than 30 ml (1 oz),
add 60 ml (2 oz) to the new replacement
compressor.
1. Install the A/C compressor.
Notice: Refer to Fastener Notice in Cautions and
Notices.
2. Install the A/C compressor bolts.
Tighten
Tighten the A/C compressor bolts to
50 N,m (37 lb ft).
3. Connect the electrical connector to the ·
AJC
comRressor.
4. Install the transmission oil cooler pipes to the
engine bracket, if removed.
HVAC System - Manual 1-45
282955
365446
208334