Ip Carrier Replacement - GMC Chevrolet Camaro 1998 Service Manual

Body and Accessories Instrument Panel, Gauges and Console 8-527
Installation Procedure
1.
Install the retainer
(1)
to the switch (2).
2. Install the switch (2) and the retainer (1) through
the opening in the 1/P carrier.
IP Carrier Replacement
Removal Procedure
1. Remove the 1/P insulators. Refer to Insulator
Replacement - IP (Left Side) or Insulator
Replacement - IP (Right Side).
2.
Remove the windshield side garnish moldings.
Refer to Windshield Side Garnish Molding
Replacement (Without Lift Off Window Pan) in
Stationary Windows.
3.
Remove the knee bolster deflector. Refer to
Bracket Replacement - Knee Bolster.
Caution: Refer to SIR Handling Caution in Cautions
and Notices.
4. Disable the SIR. Refer to Disabling the SIR
System in Restraints.
5. Remove the stoplamp switch. Refer to Stop/amp
Switch Replacement in Hydraulic Brakes.
6. Lower the steering column.
7. Remove the 1/P trim pad. Refer to Trim Pad
Replacement - IP Upper.
8. Remove the IP accessory trim plate. Refer to Trim
Plate Replacement - IP Accessory (Chevrolet) or
Trim Plate Replacement - IP Accesso,y
(Pontiac).
9. Remove the radio. Refer to Radio Replacement
(Chevrolet) or Radio Replacement (Pontiac) in
Entertainment.
1 O. Remove the instrument cluster. Refer to IP
Cluster Replacement.
11 . Remove the HV AC control. Refer to Control
Assembly Replacement in HVAC Systems
with A/C-Manual.
12.
Remove the left side air ducts.
) 13. Remove the front floor console. Refer to Console
Replacement - Front Floor.
14.
Remove the fuse block bolt.
15.
Remove the fuse block from the 1/P.
2
366722
379391