Turn And Lane-Change; Signals; Fog Lamps - GMC Equinox 2010 Owner's Manual

Turn and Lane-Change

Signals

An arrow on the instrument panel
cluster will flash in the direction of
the turn or lane change.
Move the lever all the way up or
down to signal a turn.
Raise or lower the lever until the
arrow starts to flash to signal a lane
change. Hold it there until the lane
change is complete.
The lever returns to its starting
position when it is released.
If after signaling a turn or a lane
change the arrows flash rapidly or
do not come on, a signal bulb may
be burned out.
Have the bulbs replaced. If the bulb
is not burned out, check the fuse,
see Fuses on page 9 37 for more
information.

Fog Lamps

For vehicles with fog lamps, the
control is located on the turn signal/
lane change lever.
Use the fog lamps for better vision
in foggy or misty conditions.
Lighting
(Fog Lamps): Turn the fog lamp
band on the lever to
it, to turn the fog lamps on or off.
The band will return to its original
position.
The parking lamps or low beam
headlamps must be on to use the
fog lamps.
The fog lamps will go off whenever
the high-beam headlamps are
turned on. When the high beam
headlamps are turned off, the fog
lamps will come on again.
Some localities have laws that
require the headlamps to be on
along with the fog lamps.
5-3
and release