Frame - Buell 2009 XB Series Service Manual

HOME

FRAME

REMOVAL
1. Remove fuel from frame. See
Fuel Tank.
2. Rotate engine. See 3.4 ENGINE ROTATION FOR SER-
VICE.
3. Remove exhaust header. See
4. For Firebolt and Lightning models, remove subframe tail
assembly. See 2.39 SUBFRAME TAIL ASSEMBLY AND
BODY WORK: FIREBOLT.
5. For Ulysses model, remove tail frame. See
TAIL SECTION AND BATTERY PAN:
6. Remove rear shock. See 2.23 REAR SHOCK
7. Remove upper and lower fork clamps. See
CLAMPS: UPPER AND
8. Remove main wire harness. See
NESS.
9. Remove rear isolator fastener. See
TION FOR SERVICE.
10. See Figure 2-117. Lift and remove frame from the motor-
cycle.
INSTALLATION
1. Place frame over the motorcycle.
2. Install rear isolator fastener. See
TION.
2-92 2009 XB Service: Chassis
4.14 FUEL PUMP, Draining
4.18 EXHAUST SYSTEM.
2.40 LEFT
LIGHTNING.
ABSORBER.
2.17 FORK
LOWER.
6.27 MAIN WIRE HAR-
3.4 ENGINE ROTA-
3.6 ENGINE INSTALLA-
3. Install main wire harness. See
NESS.
4. Install upper and lower fork clamps. See
CLAMPS: UPPER AND
5. Install rear shock. See 2.23 REAR SHOCK
6. For Firebolt and Lightning models, install subframe tail
assembly. See 2.39 SUBFRAME TAIL ASSEMBLY AND
BODY WORK: FIREBOLT.
7. For Ulysses model, install tail frame. See
SECTION AND BATTERY PAN:
8. Install exhaust header. See
9. Rotate engine. See 3.4 ENGINE ROTATION FOR SER-
VICE.
sm00914
Figure 2-117. Lift Frame Off Motorcycle
2.22
6.27 MAIN WIRE HAR-
2.17 FORK
LOWER.
ABSORBER.
2.40 LEFT TAIL
LIGHTNING.
4.18 EXHAUST SYSTEM.