Vehicle Speed Sensor (Vss) - Buell 2009 XB Series Service Manual

HOME

VEHICLE SPEED SENSOR (VSS)

REMOVAL
1. Remove sprocket cover. See
2. Disconnect 3-place Deutsch connector [65] under sprocket
cover. See 6.30 SPROCKET COVER
3. See Figure 6-82. Remove fastener (1) to detach vehicle
speed sensor (2) from crankcase.
INSTALLATION
1. See Figure 6-82. Lubricate o-ring with engine oil and install
fastener (1) to attach vehicle speed sensor (2) to crank-
case and tighten to 90-110 in-lbs (10.0-12.4 Nm).
2. Connect vehicle speed sensor connector [65] to wiring
harness.
3. Install sprocket cover. See
6-70 2009 XB Service: Electrical
2.36 SPROCKET COVER.
WIRING.
2.36 SPROCKET COVER.
sm00410
3
1. Fastener
2. Vehicle speed sensor
3. Rear isolator assembly
Figure 6-82. Speedometer Sensor
6.25
2
1