Buell 2009 XB Series Service Manual page 694

FASTENER
heated grip fasteners
Heel guard fasteners, passenger, Fire-
bolt and Lightning
Heel guard fasteners, rider, Firebolt and
Lightning
Horn fastener
Horn fastener
Horn fastener, Firebolt
Horn fastener, Ulysses
IAC actuator fasteners
Idler pulley assembly
Idler pulley nut and washer
Idler pulley wheel fastener
Idler pulley wheel fastener
Ignition coil fasteners
Ignition coil fasteners
Ignition coil fasteners
Ignition coil mounting screws
Ignition switch body fastener
Ignition switch body fastener
Ignition switch body fastener
Ignition switch fastener
Ignition switch fastener
Ignition switch fastener
Initial rear axle
Instrument module fastener
Instrument module fasteners
Intake cover assembly fasteners
Intake cover fasteners
Intake cover fasteners
XVI TORQUE VALUES
2009 Buell XB Models Service Manual
TORQUE VALUE
14-16 in-lbs
72-96 in-lbs
72-96 in-lbs
72-96 in-lbs
72-96 in-lbs
72-96 in-lbs
36-60 in-lbs
25-30 in-lbs
33-35 ft-lbs
33-35 ft-lbs
33-35 ft-lbs
20-23 ft-lbs
120-144 in-lbs
120-144 in-lbs
120-144 in-lbs
120-144 in-lbs
12-36 in-lbs
12-36 in-lbs
12-36 in-lbs
18-20 ft-lbs
18-20 ft-lbs
18-20 ft-lbs
23-27 ft-lbs
12-36 in-lbs
12-36 in-lbs
12-36 in-lbs
12-36 in-lbs
12-36 in-lbs
1.6-1.8 Nm 6.12 HEATED HAND GRIPS: ULYSSES
MODELS, Heated Hand Grips
8-11 Nm 2.34 FOOTPEG, HEEL GUARD AND MOUNT:
FIREBOLT/LIGHTNING, Passenger
8-11 Nm 2.34 FOOTPEG, HEEL GUARD AND MOUNT:
FIREBOLT/LIGHTNING, Rider
8-11 Nm 6.4 IGNITION/HEADLAMP KEY SWITCH, LIGHT-
NING
8.1-10.8 Nm 6.13 HORN, Installation
8-10 Nm 2.27 FAIRING SUPPORT BRACKET: FIRE-
BOLT, Installation
4-7 Nm 2.26 HEADLAMP ASSEMBLY AND SUPPORT
BRACKET, Installation: Lightning/Ulysses
2.9-3.5 Nm 4.15 THROTTLE BODY, Repair
45-47 Nm 4.14 FUEL PUMP, Installation
45-47 Nm 5.7 DRIVE BELT AND IDLER PULLEY, Idler Pulley
Installation
45-47 Nm 5.7 DRIVE BELT AND IDLER PULLEY, Drive Belt
Installation
27.1-31.2 Nm 5.7 DRIVE BELT AND IDLER PULLEY, Idler Pulley
Installation
13.6-16.3 Nm 2.24 THROTTLE CONTROL, Throttle Cable
Replacement
13.6-16.3 Nm 3.4 ENGINE ROTATION FOR SERVICE, Assembly
13.6-16.3 Nm 3.6 ENGINE INSTALLATION, Assembly
13.6-16.3 Nm 4.6 IGNITION COIL, Installation
1.4-4 Nm 6.4 IGNITION/HEADLAMP KEY SWITCH, FIRE-
BOLT
1.4-4 Nm 6.4 IGNITION/HEADLAMP KEY SWITCH, LIGHT-
NING
1.4-4 Nm 6.4 IGNITION/HEADLAMP KEY
SWITCH, ULYSSES
24.4-27.1 Nm 6.4 IGNITION/HEADLAMP KEY SWITCH, FIRE-
BOLT/LOCTITE 271 (red)
24.4-27.1 Nm 6.4 IGNITION/HEADLAMP KEY SWITCH, LIGHT-
NING/LOCTITE 271 (red)
24.4-27.1 Nm 6.4 IGNITION/HEADLAMP KEY
SWITCH, ULYSSES/LOCTITE 271 (red)
31.2-36.6 Nm 4.14 FUEL PUMP, Installation
1.4-4 Nm 2.27 FAIRING SUPPORT BRACKET: FIRE-
BOLT, Installation
1.4-4 Nm 6.26 INSTRUMENT MODULE, Installation
1.4-4 Nm 1.14 AIR CLEANER AND EXHAUST
SYSTEM, Installation
1.4-4 Nm 2.38 INTAKE COVER, Installation
1.4-4 Nm 3.6 ENGINE INSTALLATION, Assembly
NOTES