Subframe Tail Assembly And Body Work: Firebolt; Disassembly - Buell 2009 XB Series Service Manual

HOME
SUBFRAME TAIL ASSEMBLY AND BODY WORK:
FIREBOLT

DISASSEMBLY

1. Remove seat and pillion.
Disconnect negative (-) battery cable first. If positive (+)
cable should contact ground with negative (-) cable con-
nected, the resulting sparks can cause a battery explosion,
which could result in death or serious injury. (00049a)
2. Disconnect battery by unthreading fastener removing
negative cable (black) from battery first. See
MAINTENANCE.
2-130 2009 XB Service: Chassis
3. See Figure
subframe tail assembly (7).
a. Remove body work fasteners (2).
b. Disconnect passenger seat lock cable (6) by removing
cable from seat lock plate (4) and ferrule from keylock
(3).
c. Lift upper tail body work (1) off subframe tail assembly
(7).
4. Remove passenger seat latch (14) from rear of subframe
tail assembly.
1.5 BATTERY
2-165. Remove upper body work (1) from
2.39