Buell 2009 XB Series Service Manual page 68

HOME
Vertical Alignment
See Figure 1-55 or Figure 1-56. Loosen fastener on the bottom
of headlamp housing to adjust the vertical alignment. The ver-
tical headlamp adjustment screw is located under the front
upper fender.
NOTE
Only loosen headlamp alignment fastener enough to adjust
headlamp. Once headlamps are aligned, tighten fastener to
36-48 in-lbs (4-5 Nm).
pd00200
Figure 1-53. Horizontal Headlamp Adjustment Fastener
Locations: Ulysses
pd00201
Figure 1-54. Horizontal Headlamp Adjustment Fastener:
Ulysses
1-46 2009 XB Service: Maintenance
pd00202
Figure 1-55. Vertical Headlamp Adjustment Fastener:
Ulysses XB12X/XB12XP
sm05318
Figure 1-56. Vertical Headlamp Adjustment Fastener:
XB12XT