Removal; Installation; Chin Fairing - Buell 2009 XB Series Service Manual

HOME

CHIN FAIRING

REMOVAL

1. Turn wheel full right or left for easier access to center
fasteners.
2. See Figure 2-187. Remove center section fasteners and
washers (2).
3. Remove left section fasteners and washers (4).
4. Remove right section fasteners and washers (6).
5. Remove chin fairing.
NOTE
To separate the left, right and center sections, drill out the
rivets.

INSTALLATION

PART NUMBER
MAR39200HD MARSON THREAD-SETTER; TOOL
KIT
NOTE
To join the left, right and center sections, use the rivet gun from
a MARSON THREAD-SETTER;
No. MAR39200HD).
1. Apply LOCTITE 271 (red) on all fasteners.
2. See Figure 2-187. Position the assembled chin fairing and
loosely install right side fasteners and washers (6).
3. Align center section (1) and loosely install center section
fasteners and washers (2).
NOTE
Turn wheel full right or left for easier access to center fasteners.
2-158 2009 XB Service: Chassis
TOOL NAME
TOOL KIT (Part
4. Align left section (3) and loosely install left side fasteners
and washers (4).
5. Tighten all fasteners to 36-48 in-lbs (4-5 Nm).
sm00125
5
6
1. Center section
2. Center section fasteners and washers (2)
3. Left section
4. Left section fastener and washer (2)
5. Right section
6. Right section fastener and washer (2)
Figure 2-187. Chin Fairing
2.50
4
3
1
2