Buell 2009 XB Series Service Manual page 82

HOME
FASTENER
Clutch hand lever fasteners
Clutch inspection cover fasteners
Damper rod jamnut
Deflector fasteners
Deflector jam nuts
Deflector pivot shaft risers
ECM fasteners
ECM fasteners, Ulysses
Electronic control module fasteners
Engine shift lever pinch screw
Engine shroud air scoop fasteners
Fairing support bracket fasteners, Fire-
bolt
Fender fasteners
Flasher fastener
Footpeg mount
Footpeg mount, Firebolt and Lightning
Footpeg mount, Firebolt and Lightning
Footpeg mount fasteners, rider
Footpeg mount fasteners, rider, Firebolt
and Lightning
Footpeg support bracket
Footpeg support bracket
Fork cap
Fork clamp, lower
Fork clamp, lower
Fork clamp, upper
Fork clamp, upper
2-4 2009 XB Service: Chassis
TORQUE VALUE
60-84 in-lbs 7-9.5 Nm
84-108 in-lbs 9.5-12 Nm
22-30 ft-lbs 30-41 Nm
24-36 in-lbs 2.7-4 Nm
39-48 in-lbs 4.4-5.4 Nm
43-49 in-lbs 4.8-5.5 Nm
36-60 in-lbs 4-7 Nm
36-60 in-lbs 4-7 Nm
72-96 in-lbs 8-11 Nm
48-60 in-lbs 5.4-7 Nm
12-36 in-lbs 1.4-4 Nm
16-18 ft-lbs 22-26 Nm
12-36 in-lbs 1.4-4 Nm
36-60 in-lbs 4-7 Nm
132-144 in-lbs 15-16 Nm
25-28 ft-lbs 34-38 Nm
25-28 ft-lbs 34-38 Nm
132-144 in-lbs 14.9-16.2 Nm
132-144 in-lbs 14.9-16.2 Nm
132-144 in-lbs 14.9-16.2 Nm
132-144 in-lbs 14.9-16.2 Nm
22-30 ft-lbs 30-41 Nm
20-22 ft-lbs 27-30 Nm
20-22 ft-lbs 27-30 Nm
23-25 ft-lbs 31-34 Nm
23-25 ft-lbs 31-34 Nm
NOTES
2.32 HANDLEBARS: LIGHT-
NING/ULYSSES, Installation
2.25 CLUTCH CONTROL, Assembly and Installa-
tion/Tighten in a crosswise pattern
2.16 FRONT FORKS: ALL MODELS, Assembly
2.28 DEFLECTORS:
XB9SX/XB12X/XB12XT/XB12XP, Assembly and
Installation
2.28 DEFLECTORS:
XB9SX/XB12X/XB12XT/XB12XP, Assembly and
Installation
2.28 DEFLECTORS:
XB9SX/XB12X/XB12XT/XB12XP, Assembly and
Installation
2.43 LEFT TAIL SECTION AND BATTERY PAN:
ULYSSES MODELS, Assembly
2.45 RIGHT TAIL SECTION: ULYSSES
MODELS, Assembly
2.26 HEADLAMP ASSEMBLY AND SUPPORT
BRACKET, Installation: Firebolt
2.25 CLUTCH CONTROL, Assembly and Installa-
tion
2.49 AIR SCOOPS, Engine Shroud Air Scoop
2.27 FAIRING SUPPORT BRACKET: FIRE-
BOLT, Installation
2.15 FENDERS, Rear Fender:
XB12Ss/XB12XT/XB12X
2.26 HEADLAMP ASSEMBLY AND SUPPORT
BRACKET, Assembly: Firebolt
2.35 HEEL GUARD AND FOOTPEG MOUNTS:
ULYSSES MODELS, Mount Installation
2.34 FOOTPEG, HEEL GUARD AND MOUNT:
FIREBOLT/LIGHTNING, Passenger/LOCTITE 271
(red)
2.39 SUBFRAME TAIL ASSEMBLY AND BODY
WORK: FIREBOLT, Assembly/LOCTITE 271 (red)
2.37 BELT GUARDS, Installation
2.34 FOOTPEG, HEEL GUARD AND MOUNT:
FIREBOLT/LIGHTNING, Rider
2.54 LUGGAGE: XB12XT, Installation: Side Case
2.55 LUGGAGE: XB12XP, SIDE CASE
2.16 FRONT FORKS: ALL MODELS, Assembly
2.17 FORK CLAMPS: UPPER AND
LOWER, Installation: Firebolt/LOCTITE 271 (red)
2.17 FORK CLAMPS: UPPER AND
LOWER, Installation: Lightning/Ulysses/LOCTITE
271 (red)
2.17 FORK CLAMPS: UPPER AND
LOWER, Installation: Firebolt/LOCTITE 271 (red)
2.17 FORK CLAMPS: UPPER AND
LOWER, Installation: Lightning/Ulysses/LOCTITE
271 (red)