Buell 2009 XB Series Service Manual page 349

HOME
sm00176
1
1. Crankcase fasteners
2. Crankcase fastener behind shifter mechanism
7. See Figure 3-139. Assemble crankcase halves together.
a. Apply a thin coat of GREY HIGH-PERFORMANCE
SEALANT (Part No. 99650-02) to crankcase joint
faces.
b. Slide outer race in right crankcase over pinion shaft
and bearing assembly.
c. Apply LOCTITE 271 (red) to the last few threads and
tighten fasteners to 15-19 ft-lbs (20-26 Nm).
NOTES
According to manufacturing, there is no torque sequence
to follow when tightening crankcase fasteners.
See Figure 3-140. Kent-Moore has developed additional
tools to be used with SPROCKET SHAFT BEARING
INSTALLER (Part No. HD-42579). You will need
SPROCKET SHAFT ADAPTER (Part No. B-42579-6) and
COLLAR (Part No. B-42579-7). The addition of these tools
will update HD-42579 SPROCKET SHAFT BEARING
INSTALLER to HD-42579-A. In addition, you will need
SPROCKET SHAFT SEAL INSTALLER (Part No. B-
45676-A) to use with these additional tools to install the
seal into the left crankcase. In order to install the sprocket
shaft inner bearing race for sprocket shaft bearing, you
will need to borrow from the Big Twin SPROCKET SHAFT
SEAL INSTALLER, COLLAR (Part No. HD-97228-55A).
D
1
Figure 3-139. Crankcase Fasteners
sm00196
Figure 3-140. Sprocket Shaft Seal/Spacer Installer
1
1
2
2009 XB Service: Engine 3-95