Buell 2009 XB Series Service Manual page 472

HOME
sm00476
4
1. Socket head fastener (1) with spacer behind switch
2. Tamper-resistant Torx fasteners (2)
3. Throttle cables
4. Ignition switch as positioned on vehicle
5. Fork stop pin (retracted)
Disassembly
1. See Figure 6-9. Remove ignition switch housing (5) from
ignition switch (4) by prying tabs on side of housing.
2. Remove ignition switch body fasteners (1). Separate igni-
tion switch body (2) from ignition switch (4).
6-12 2009 XB Service: Electrical
3
Figure 6-8. Ignition Switch: Lightning (Typical)
1
2
Assembly
NOTE
See Figure 6-9. In next step, be sure wide slot in ignition switch
housing (5) is installed over wide boss on ignition switch (4).
1. Push ignition switch housing (4) on to ignition switch (5).
NOTE
In next step, do not force ignition switch (5) into ignition switch
body (2). If ignition switch does not easily slide into ignition
5