HOME
4.
Install footpeg mount fasteners (2), and tighten to 132-144
in-lbs (15-16 Nm).
5.
Install brake pedal fastener. See
sm00649
Figure 2-158. Right Side Heel Guard and Footpeg Mount:
Ulysses
sm00651
Figure 2-159. Rear Brake Master Cylinder Location: Ulysses
HEEL GUARD REPLACEMENT
1.
2.11 BRAKE
PEDAL.
2.
3.
See
Figure
2-160. If necessary, cut the rubber heel guard
tabs on the inside of the footpeg mount to remove the heel
guard.
Pull rubber cones of replacement heel guard through the
holes in footpeg mount.
Cut excess rubber from ends of cones capturing the heel
guard to the footpeg mount.
sm00650
Figure 2-160. Heel Guard: Ulysses
2009 XB Service: Chassis 2-125