HOME
OIL RESERVOIR AND OIL HOSE ROUTING
GENERAL
See
Figure
3-95. Engine oil runs through the swingarm which
serves as the oil reservoir. From the front of the reservoir, the
vent line (11) runs to the rear of the oil pump body (1). The
return oil line (7) and the feed oil line (6) run to the rear of the
oil pump body (1).Three rubberized clamps (8) and one plastic
clamp (12) secure the lines in place.
The oil cooler feed line (3) exits the front of the oil pump and
routes across the front of the engine to the oil cooler on the
left front side of the crankcases. The oil cooler return line (2)
then exits the oil cooler and connects to the oil pump on the
right front side of the crankcases.
For more information see
3.9 OILING
2009 XB Service: Engine 3-67
3.11
SYSTEM.