Buell 2009 XB Series Service Manual page 474

HOME
7. While holding the throttle cables to your left (the right side
of the vehicle), pull the ignition switch toward you and roll
the assembly away from you until the fork stop pin is
pointing down.
sm00475
1. Turn signal flasher connector [30]
2. Instrument cluster connector [39]
3. Right handlebar connector [22]
4. Left handlebar connector [24]
5. Turn signal connectors [31]
6. Ignition switch
Disassembly
1. See Figure 6-11. Remove housing (4) from ignition switch
(5) by prying tabs on side of housing.
2. Remove body fasteners (1). Separate body (2) from igni-
tion switch (5).
6-14 2009 XB Service: Electrical
3
5
Figure 6-10. Electrical Connectors Behind Windscreen: Ulysses
8. Slide the ignition switch assembly out to your left (the right
side of the vehicle).
2
5
6
9
11
7
8
12
7. Cable strap
8. Main harness
9. Horn fastener
10. Horn mount
11. Horn connector [122]
12. Horn
Assembly
See Figure 6-11. In next step, be sure wide slot in housing (4)
is installed over wide boss on ignition switch (5).
1. Push housing (4) on to ignition switch (5).
4
1
5
10
NOTE