Frame - Buell 2007 FIREBOLT Service Manual

HOME

FRAME

REMOVAL
1. Remove fuel from frame. See
4.39 FUEL PUMP.
2. Rotate engine. See 3.3 ENGINE ROTATION FOR SER-
VICE.
3. Remove exhaust header. See
4. Remove subframe tail assembly. See
TAIL ASSEMBLY AND BODY
5. Remove rear shock.
ABSORBER.
6. Remove upper and lower fork clamps. See
CLAMPS, UPPER AND
7. Remove main wire harness. See
NESS.
8. Remove rear isolator fastener. See
MOTORCYCLE FOR ENGINE
9. Lift and remove frame from the motorcycle.
INSTALLATION
1. Place frame over the motorcycle.
2. Install rear isolator fastener. See
LATION.
3. Install main wire harness. See
NESS.
4. Install upper and lower fork clamps. See
CLAMPS, UPPER AND
5. Install rear shock. See 2.22 REAR SHOCK
6. Install subframe tail assembly. See
TAIL ASSEMBLY AND BODY
7. Install exhaust header. See
8. Rotate engine. See 3.3 ENGINE ROTATION FOR SER-
VICE.
DRAINING FUEL TANK
2.28 EXHAUST SYSTEM.
2.36 SUBFRAME
WORK.
See 2.22 REAR SHOCK
2.17 FORK
LOWER.
7.23 MAIN WIRE HAR-
3.4 STRIPPING
SERVICE.
3.5 ENGINE INSTAL-
7.23 MAIN WIRE HAR-
2.17 FORK
LOWER.
ABSORBER.
2.36 SUBFRAME
WORK.
2.28 EXHAUST SYSTEM.
8483
in
Figure 2-87. Lift Frame Off Motorcycle
2007 Buell Firebolt: Chassis
2.21
2-63