Buell 2009 XB Series Service Manual page 106

HOME
sm00522
4
3
6
1. Wheel bearing
2. Front wheel bearing installer
3. Forcing screw
4. Washer
5. Nice bearing
6. Nut
Figure 2-15. Install the Bearing
2-28 2009 XB Service: Chassis
See
1
wheel bearing. Failure to center the spacer could cause the
2
bearing not to pull in straight.
11. See
12. Slide the FRONT BEARING INSTALLER (Part No. B-
13. Install a washer (4), Nice bearing (5) and nut (6) onto the
14. See
15. Remove the nut, bearing, washer, front bearing installer,
5
16. Install the wheel. See
NOTE
Figure 2-14. Center the spacer (2) while installing the
Figure 2-15. Insert a new wheel bearing (1) squarely
into the hub, with the lettered side facing out (away from
the wheel).
43993-9) (2) onto the forcing screw (3), with the smaller
diameter toward the bearing bore.
forcing screw (3).
Figure 2-15. While holding the forcing screw (3),
tighten the nut (6) until the bearing contacts the spacer.
and forcing screw.
2.5 FRONT WHEEL, Installation.