Buell 2009 XB Series Service Manual page 532

HOME
INSTALLATION
1. See Figure 6-89 (Firebolt),
Figure 6-91 (Ulysses). Place instrument module (2) into
position in support (1).
2. Install washers (4) and fasteners (5). Tighten fasteners to
12-36 in-lbs (1.4-4 Nm).
3. See Figure 6-86 (Firebolt),
Figure 6-88 (Ulysses). Connect instrument module con-
nector [39].
4. For Firebolt, install headlight support bracket and install
front fairing. See 2.26 HEADLAMP ASSEMBLY AND
SUPPORT BRACKET.
5. For Lightning, install windscreen and for Ulysses, install
windscreen/windshield. See
AND SUPPORT BRACKET.
6. Install negative battery cable.
After installing seat, pull upward on seat to be sure it is
locked in position. While riding, a loose seat can shift
causing loss of control, which could result in death or
serious injury. (00070b)
7. Install seat.
sm00414
Figure 6-86. Instrument Module Connector [39]: Firebolt
6-72 2009 XB Service: Electrical
Figure 6-90 (Lightning) or
Figure 6-87 (Lightning), or
2.26 HEADLAMP ASSEMBLY
sm00466a
Figure 6-87. Instrument Module Connector [39]: Lightning
sm00465a
Figure 6-88. Instrument Module Connector [39]: Ulysses