Installation - Buell 2009 XB Series Service Manual

HOME

INSTALLATION

1. See Figure 2-156. Position footpeg mount (3) onto sub-
frame tail assembly.
2. Install footpeg mount (3). Using LOCTITE 271 tighten,
fasteners (10) to 25-28 ft-lbs (34-38 Nm).
3. Position heel guard (2) onto footpeg mounts (3).
4. Install heel guard (2).
5. Tighten heel guard fasteners to 72-96 in-lbs (8-11 Nm).
6. Position footpeg (8), detent plate (6), ball (5), and spring
(4) on to footpeg mount (3).
7. Install footpeg pin (9).
8. Install clip (7).
9. Check that footpeg clicks in the up and down position.
sm03837
2
3
4
5
6
7
1. Heel guard fasteners
2. Heel guard
3. Footpeg mount
4. Spring
5. Ball
6. Detent plate
7. Clip
8. Footpeg
9. Pin
10. Footpeg mount fastener
11. Jamnut (Lightning only)
Figure 2-156. Passenger Footpeg, Mount and Heel Guard
Assembly: Lightning
2009 XB Service: Chassis 2-123
1
11
10
9
8