Replacing The Waste Toner Bottle - Konica Minolta magicolor 7450 Service Manual

Field Service Ver. 1.0 May 2006
3.4.5

Replacing the Waste Toner Bottle

[1]
[2]
[3]
1. Open the Front Door.
2. Press the Waste Toner Bottle
release lever [1].
4038F2C541DA
3. Remove the Waste Toner Bottle [2].
NOTE
• Raise the Waste Toner Bottle gently
before removing it.
• If scattered toner has accumulated
in the vicinity of the toner collecting
port, do not tilt the Waste Toner
Bottle when removing it.
• Do not leave the Waste Toner Bottle
in a tilted condition after removing
it.
4038F2C542DA
4. Clean the surface around the waste
toner collecting port.
See P.76
5. Remove the Waste Toner Bottle from
its box, and remove the packing
material.
6. Set the Waste Toner Bottle [3] in
place.
7. Close the Front Door.
NOTE
• Replace the Dust Filter/Cooling Fan
supplied with the Waste Toner Bot-
4038F2C543DA
tle at the same time.
3. Periodical check
17