Throttle Body Removal - Suzuki VL800 Service Manual

14-104 VL800K5 ('05-MODEL)

THROTTLE BODY REMOVAL

• Remove the air intake pipe. ($14-103)
• Disconnect the TP sensor lead wire coupler 1, STVA lead
wire coupler 2 and STP sensor lead wire coupler 3.
• Disconnect the fuel injector lead wire couplers 4.
• Disconnect the vacuum hoses 5.
• Loosen the throttle body clamp screw at the intake pipe side.
• Disconnect the throttle cables from their drum.
#
After disconnecting the throttle cables, do not snap
the throttle valve from full open to full close. It may
cause damage to the throttle valve and throttle body.