Suzuki VL800 Service Manual page 414

14-62 VL800K5 ('05-MODEL)
Step 1 (When indicating P0110-H:)
1) Remove the air cleaner box. ($14-103)
2) Turn the ignition switch OFF.
3) Check the IAT sensor coupler for loose or poor contacts.
If OK, then check the IAT sensor lead wire continuity.
4) Disconnect the IAT sensor coupler and ECM coupler.
5) Check the continuity between Dg wire A and terminal 2.
6) Also, check the continuity between B/Br wire B and terminal
D.
" 09900-25008: Multi-circuit tester set
09900-25009: Needle pointed probe set
) Tester knob indication: Continuity test (()
Is the continuity OK?
YES Go to Step 2.
NO Dg or B/Br wire open.
7) After repairing the trouble, clear the DTC using SDS tool.
($14-39)
1
1
1
Terminal side