CUSHION LEVER BEARING
Insert the spacer into bearing and check the play to move the
spacer up and down. If an excessive play is noted, replace the
bearing with a new one.
• Remove the cushion rod lower side bearing 1 by using the
special tools.
" 09921-20220: Bearing remover set (17 mm)
!
The removed bearings must be replaced with new ones.
• Remove the cushion lever mounting bearing 2 and shock ab-
sorber lower side bearing 3 by using the special tools.
" 09913-70210: Bearing installer set
!
The removed bearings must be replaced with new ones.
SHOCK ABSORBER
Inspect the shock absorber body and bush for damage and oil
leakage. If any defects are found replace the shock absorber
with a new one.
!
Do not attempt to disassemble the rear shock absorber
unit. It is unserviceable.
CHASSIS 7-51