Suzuki VL800 Service Manual page 216

7-40 CHASSIS
INSPECTION AND DISASSEMBLY
WHEEL BEARING .................................................. '7-6
WHEEL AXLE ......................................................... '7-6
WHEEL RIM ............................................................ '7-6
TIRE ......................................................................... '2-18
WHEEL DAMPER
Inspect the wheel dampers for damage or wear.
REASSEMBLY AND REMOUNTING
Reassemble and remount the rear wheel in the reverse order of
removal and disassembly. Pay attention to the following points:
WHEEL BEARING
• Apply grease to the bearings before installation.
For USA
# 99000-25030: SUZUKI SUPER GREASE "A"
For the other countries
# 99000-25010: SUZUKI SUPER GREASE "A"
• Install the wheel bearings using the special ool.
" 09941-34513: Bearing installer set
!
* First, install the right wheel bearing, then install the
left wheel bearing.
* The sealed cover on the bearing must face out.
Left Right Left
Clearance
Right
Spacer