Suzuki VL800 Service Manual page 102

Hide thumbs Also See for VL800:

Table of Contents

• Install the wave washer seat 1 and the wave washer 2.

• Install the clutch drive plate No.2 A first.

• Install the drive and driven plate one by one into the clutch

• Install the push rod.

• Install the clutch push piece 3, bearing 4 and thrust washer

• Apply engine oil to the bearing.

• Install the springs and tighten the clutch spring set bolts diago-

nally to the specified torque.

# Clutch spring set bol : 10 N . m (1.0 kgf . m, 7.0 lb-ft)

• Install the new clutch cover gasket and dowel pins.

Chapters

Table of Contents

Intruder vl800