Mm (5.55 In); Mm (5.43 In) - Suzuki VL800 Service Manual

18-62 VL800/C/TK9 ('09-MODEL)
Clamp
High tension cord
Wiring harness
High tension cord
*1
TO sensor
Luggage
box plate
Cushion
*4
To HO2 sensor
(For E-02, 19, 24, 33)
28 mm
(1.1 in)
*1 Set the lead wire under the starter relay.
*2 Set the couplers inside of the frame.
*3 Set the coupler behind the IG switch body.
Pass the HO2 sensor lead wire inside of the
*4
cover.
Pass the lead wires under the frame.
*5
Do not contact the lead wires with fuel tank.
Turn
down.
Clutch cable
0 – 5 mm m
(0.0 – 0.2 in) – 0
0 – 20 mm
(0.0 – 0.8 in)
*2
Clamp
Frame
Fuel tank
*5
50 – 80 mm
(2.0 – 3.1 in)
Clamp
*7
Clamp
IAT sensor
Battery
lead wire
*10
To HO2 sensor
(For E-02, 19, 24, 33)
Horn
Speedometer
harness
*6
Clamp Clamp
No use.
*8
*9
Shroud
Frame
Wiring harness
FWD
Radiator
Do not contact the plug cap(s) with cylinder
*6
head cover cap.
*7 Pass the harness inside of the frame.
Pass the lead wire over the engine mounting
*8
bracket.
After connecting the HO2 sensor coupler, set
*9
the coupler in the inside of bracket.
Pass the battery - lead wire inside of the
*10
ECM.
Protector
For E-03, 28
To brake
switch,
etc.
To horn