Suzuki VL800 Service Manual page 210

Hide thumbs Also See for VL800:

Table of Contents

7-34 CHASSIS

• When setting the handlebar clamp to the handlebar holder of

the steering upper bracket, face the punched mark A on its

clamp forward.

• Install the handlebars with the punch mark B aligned with the

handlebar clamp as shown.

• First, tighten the handlebar clamp bolts 1 to the half of speci-

fied torque, and then tighten the handlebar clamp bolts 1 and

2 to the specified torque.

$ Handlebar set bolt: 23 N . m (2.3 kgf . m, 16.5 lb-f )

• Install the handlebar set bolt cap.

• Apply grease to the throttle cable end

# 99000-25030: SUZUKI SUPER GREASE "A"

For the other countries

# 99000-25010: SUZUKI SUPER GREASE "A"

• Install the front brake master cylinder. ('7-17)

$ Front master cylinder mounting bolt: 10 N . m

(1.0 kgf . m, 7.0 lb-ft)

Chapters

Table of Contents

Intruder vl800