Suzuki VL800 Service Manual page 620

18-80 VL800/C/TK9 ('09-MODEL)
THERMOSTAT + RADIATOR + FAN + ENGINE COOLANT
ITEM
Thermostat valve opening
temperature
Thermostat valve lift
ECT sensor resistance
Radiator cap valve opening
pressure
Cooling fan thermo-switch
operating temperature
Engine coolant type
Engine coolant capacity
INJECTOR + FUEL PUMP + FUEL PRESSURE REGULATOR
ITEM
Injector resistance
Fuel pump discharge amount
Fuel pressure regulator operating
set pressure
STANDARD/SPECIFICATION
Approx. 75 °C (167 °F)
Over 6 mm (0.24 in) at 90 °C (194 °F)
20 °C
(68 °F)
40 °C
(104 °F)
60 °C
(140 °F)
80 °C
(176 °F)
95 – 125 kPa
(0.95 – 1.25 kgf/cm², 13.5 – 17.8 psi)
OFF → ON
Approx. 105 °C (221 °F)
ON → OFF
Approx. 100 °C (212 F)
Use an antifreeze/coolant compat ble with alumi-
num radiator, mixed with distilled water only, at the
ratio of 50:50.
1 500 ml
(1.6/1 3 US/lmp qt)
SPECIFICATION
* 9.5 – 11.5 Ω at 20 °C (68 °F)
Approx. 168 ml (5.7/5.9 US/lmp oz)
and more/10 sec.
Approx. 300 kPa (3.0 kgf/cm², 43 psi)
Approx. 2.45 kΩ
Approx. 1.148 kΩ
Approx. 0.587 kΩ
Approx. 0.322 kΩ
NOTE
—
—
—
—
—
—
—
—
—
—
—
NOTE