Suzuki VL800 Service Manual page 207

INSPECTION AND DISASSEMBLY
Inspect the removed parts for the following abnormalities.
* Handlebars distortion
* Race wear and brinelling
* Bearing wear or damage
* Abnormal bearing noise
* Distortion of the steering stem
• Remove the steering stem lower bearing inner race by using a
chisel.
!
The removed bearing and inner race must be replaced
with a new one.
• Drive out the steering stem upper and lower bearing races by
using the special tools and suitable bar.
" 09941-54911: Bearing outer race remover
REASSEMBLY AND REMOUNTING
Reassemble and remount the steering stem in the reverse order
of removal and disassembly. Pay a tention to the following points.
OUTER RACES
• Press in the upper and lower outer races using the special tool.
" 09941-34513: Steering outer race installer
BEARINGS
• Press in the lower bearing using the special tool.
" 09941-74911: Steering bearing installer
CHASSIS 7-31